You are about to leave jnjmedicaldevices.com. By clicking to continue, you will be taken to a web site governed by their own Legal and Privacy Policies.
3D-Printed Patient-Specific Surgical Guides*
Designed to assist with osteotomies and to accurately transfer the virtual surgical plan to the surgical site.
Some examples include, but are not limited to:
- Mandible and midface resection and drilling guides
- Graft harvesting and drilling guides (e.g. fibula, iliac crest, scapula)
- Osteotomy and plate positioning guide for placement of distractor footplates
- Surgical guides for segment and/or graft resection and segment (re)placement in cranial vault reconstruction
- Osteotomy and drill guide for orthognathic surgery (3D printed titanium)
- Osteotomy and drill guide for secondary osteotomy and repositioning of the Zygoma (3D printed titanium)
Resection and drilling guide for mandible reconstruction (polyamide)
Resection guide for midface reconstruction (polyamide)
Graft harvesting and drilling guide (polyamide)
Osteotomy and foot plate positioning guide for distraction (polyamide)
Osteotomy guide for cranial vault reconstruction (polyamide)
Osteotomy and drill guide for orthognathic surgery (3D printed titanium)
Osteotomy and drill guide for secondary osteotomy and repositioning of the Zygoma (3D printed titanium)
Frequently Asked Questions (FAQ)
PROPLAN CMF™ ONLINE
Why does it take two business days to activate my new web account?
That time is necessary to verify your account information.
I already have a PROPLAN CMF™ Online account, but I forgot my password. How can I access my account?
Click on "Forgot your password?" in the PROPLAN CMF™ Online Sign In window. You have to enter the e-mail address you used to create your PROPLAN CMF™ Online account. You will then receive an e-mail with your password.
I have successfully logged-in to PROPLAN CMF™ Online. How can I create my first medical case?
Choose “Add Case” in your Home Screen. Follow the instructions on the screen and fill in the required fields in order to create your first case. Once the case is created, you can upload your CT Data and any other imaging files, and a filled out the Request for Service Form for your required procedure.
Where I can find the PROPLAN CMF™ Online user manual?
Please log into your account and download the User manual under the Help section.
Are there any specific requirements for CT Scan Data?
Yes, follow the Scanning Protocol provided under the “Down
loads” section in order to take CT Data that fulfills the requirements for PROPLAN CMF™ cases.
I have successfully created a new case in PROPLAN CMF™ Online and uploaded all the required Information (Filled out Request for Service Form and CT Data). What do I need to do next?
After your case information is uploaded, your CT Scan Data will be checked. If everything is OK, you will get contacted by a clinical engineer from our design team in order to discuss the next steps.
For orthognathic cases
To manufacture surgical splints with accurate dentition data, high resolution data of the teeth is required. There are three options to provide high resolution dentition data shown in the guide below.
How can I track my ongoing cases?
Log into PROPLAN CMF™ Online account. Choose “View Cases” in your Home Screen. You will see a list of all your ongoing cases with a status notification. You may choose a specific case and press “Open Case” for further details.
Do I need to use PROPLAN CMF™ Online as well, for my anatomical model only cases?
Yes, for anatomical models PROPLAN CMF™ Online shall be used.
What needs to be done to do a planning session with a clinical engineer?
Once the case created in PROPLAN CMF™ Online and the required information is uploaded successfully, you will get contacted by a clinical engineer in order to schedule the planning session. Once the planning session is set up, you will get an Outlook invitation with a link to start a GoTo meeting. Shortly before the meeting you may open the GoTo meeting link in your meeting invitation in order to access the GoTo meeting for your planning session.
What is needed to attend a GoTo meeting?
GoTo meeting can be accessed via a PC, a Mac®, iPad®, iPhone® or Android device for audio and visual connection. An audio only connection via mobile- or fixed network phone is also possible, but not recommendable. See the following link for further information about system requirements to attend a GoTo meeting or about how to set up an audio and video connection: https://support.logmeininc.com/gotomeeting. When using for the first time GoTo meeting, it is recommended to initiate the connection 10 min before, to get familiar with the environment and allow any plug in to be installed. iOS and Android apps can be used on mobile devices as well.
What is the next step after a planning session took place?
At the end of the planning session, while still online, you will be asked to approve the plan and confirm the preferences collected for the additional requested devices (models, guides, implants).
After the planning session, the clinical engineer will fine-tune the plan. The guides and implants will be designed, and a comprehensive case report will be provided.
Is there a planning session needed to receive an anatomical model?
In most cases no planning session is needed. In some cases, if specific (e.g. Tumor) structures need to be highlighted, a short planning session may be required.
How should I approve the case report?
The case report can be approved electronically or it can be printed out, signed and faxed or scanned and e-mailed back to the contact coordinates mentioned on the case report.
What are the costs for the planning service?
If a surgical kit or a planned outcome model will be purchased, the data preparation, the planning session and additional support to receive the product is included in the product price. For further information about the costs you may contact your local DePuy Synthes representative or distributor.
Will the devices be supplied sterile?
At this time, the devices need to be processed and sterilized in the hospital according to the instructions provided with the package.
What are the sterilization parameters for the different devices?
Please refer to the Instructions for Use (IFU) that are provided with every delivery. The sterilization parameters are material dependent.
* Manufactured by Materialise
All links to external website links are being provided as a convenience and for informational purposes only, Johnson & Johnson Medical Devices bears no responsibility for the accuracy, legality or content of the external site or for that of subsequent links. Contact the external site for answers to questions regarding its content.
Please refer to the instructions for use for a complete list of indications, contraindications, warnings and precautions.
The third-party trademarks used herein are the trademarks of their respective owners.